高低溫濕熱試驗箱又名環境試驗機，試驗各種材料耐熱、耐寒、耐干、耐濕性能。適合電子、電器、通訊、儀表、車輛、塑膠制品、金屬、食品、
化學、建材、醫療、骯天等制品檢測質量之用。
Constant temperature and humidity testing machine is also called environment testing machine, used to test various types of materials for their
tolerances of heat, cold, dry, humidity. Application: Quality inspection for all types of electronic products, electric appliance, and products from
communication, instrument, automobile, plastic, bbbbl, food, chemical, building materials, medical and aerospace industries.
執行與滿足標準及試驗方法:
GB2423.1-2008/IEC6008-2-1-2007 低濕試驗方法
GB/T 2423.2-2008 高溫試驗方法
GJB150.3A一2009 高溫試驗方法
GJ B 150.4A一2009 低溫試驗方法
GB2423.22-2008 溫度變化速率試驗方法
GBT 2424.5-2006 溫度試驗箱性能確認
GB/T 10589-2008 低溫試驗箱技術條件
GB/T2423.3-2008(1 EC68-2-3) 恒定濕熱試驗方法
GJ B 150.9A-2009 濕熱試驗方法
G/BT 2423.4-2008/IEC6008-2-30:2005 交變濕熱方法
GB/T5170.18-2005 溫度護濕度組合回圈試驗設備檢定方法
GB/T10586-2006 濕熱試驗箱技術條件
GBT 2424.6-2006 溫度濕度試驗箱性能確認
GBT 2424.7-2006 (帶負載)溫度試驗箱的測量
技術參數
型號Model | SN-C-80(A-G) | SN-C-150(A-G) | SN-C-255(A-G) | SN-C-408(A-G) | SN-C-608(A--G) | SN-C-800(A-G) | SN-C-1000(A-G) |
內部尺寸WxHxD(cm) | 40x50x40 | 50x60x50 | 50x75x60 | 60x85x80 | 80x95x80 | 100x100x80 | 100x100x100 |
外部尺寸WxHxD(cm) | 90x136x94 | 100x146x104 | 100x161x117 | 110x171x137 | 130x181x137 | 150x186x137 | 150x186x157 |
溫度范圍 Temperature Range | -70℃一+100C(150C)(A:25"C B:OC C:-20`C D:-40'C E:-500C F:-60'C G:-70"C) |
濕度范圍Humidity Range | 20%-98%R.H.(10%-98%R.H/5%-98%R.H為特殊選用條件R.His a special optional condition |
溫濕度解析精度/均勻度 | 0.011C;0.1 %R.H./土1.0C;士3.0%R.H. |
溫濕度控制精度/波動度 | ±1.0C:±2.0%R.H./±0.5C;±2.0%R.H. |
升溫降溫時間 | 平均2-15C汾鐘(5-15/min度降溫速度的408L以上機臺方可) Approximabbby 2-15C/minute(下he machine should be with the cooling rate is 515/min and capacity is above 408L) |
內外部材質 | 外箱為SUS304#不銹鋼表面條紋處理，內箱SUS 304#為不銹鋼 The external box is the SUS304# stainless steel surface strips，the inner box is SUS304# stainless steel. |
保溫材質 | 耐高溫高密度聚胺脂硬質發泡絕緣體材料 High temperature resistant high density polyurethane rigid foam insulation materials. |
冷卻系統 | 風、水冷式w段壓縮機 Air. Watercoolinq/double segment compressor |
保護裝置 | 無熔絲開關、壓縮機過載保護開關、冷媒高壓保護開關、超濕度超高溫產開關、保險絲、故障警告系統 Fuse-free switch, overload protection switch for compressor巾動and low voltage coolant protection switch, over-humidity and over-temperature, fuses, failure warning system |
配件 | 記錄器(選購)、觀視窗、50mm測試孔、PL箱內燈、隔板、干濕球紗布 Recorder (optional), watching bbbbbb, 50mm testing hole,PL internal bulbs,partition plate, dry and wet ball gauze |
控制器 | 韓國“TEMI" South Korea "TEMI”或日本“OYO”牌Japan's "OYO" Brand任選Optional |
壓縮機 | 法國“泰康”牌France's "Tecumseh" Brand |
電源 | 3Φ380VAC土10% 50/60HZ |
